🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore
1990 Fender Precision Bass ‘70 Vintage Reissue PB70-700 Black w/ Ash Body, Japan MIJ Fujigen
1990 Fender Precision Bass ‘70 Vintage Reissue PB70-700 Black w/ Ash Body, Japan MIJ Fujigen
Up for sale, a 1990 Fender Precision Bass ‘70 vintage reissue model PB70-700 in excellent, 100% original condition and in perfect working order. This “Made in Japan” P Bass was crafted exclusively for the Japanese domestic market during the golden age of Fender Japan production, uncommon outside its country of origin.
Weighing 9lbs 5oz, tonewoods include an ash body and a one-piece maple neck. The split-coil pickup delivers the warmth, sweet treble articulation and fundamental thump that defines the Precision tone, particularly round and rumbling with the Tone knob rolled back. This PB70-700 has been professionally setup here at Mike & Mike’s Guitar Bar with 45-100 roundwound strings, easy-playing action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Slender C, measuring .805” 1st fret, .970” 12th fret
-Fretboard: Maple, vintage-spec 7 ¼” radius
-Frets: Slender, no wear
-Scale Length: 34”
-Nut: 1 9/16”, bone
-Tuners: Clover buttons
-Serialization: “Made in Japan,” J-prefix
-Factory Markings: Model stamps on neck heel/pocket
Body Specs:
-Wood: Ash
-Pickups: PB-Vintage split-coil
-Controls: Volume, Tone
-Harness: Full-size Japanese pots date to May/October, 1990
-Hardware: Bridge with steel barrel saddles, flat-top knurled knobs
-Plastics: Three-ply white pickguard
The gloss Black finish has one chip adjacent to the neck pocket on the treble side, an area of shallow buckle scuffing on the upper bout of the back, and some minor nicks finish and scratches, largely limited to the lower bout perimeter. The ambered gloss on the neck profile is smooth and clean with just a couple shallow marks.
A gigbag is included.
Weighing 9lbs 5oz, tonewoods include an ash body and a one-piece maple neck. The split-coil pickup delivers the warmth, sweet treble articulation and fundamental thump that defines the Precision tone, particularly round and rumbling with the Tone knob rolled back. This PB70-700 has been professionally setup here at Mike & Mike’s Guitar Bar with 45-100 roundwound strings, easy-playing action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Slender C, measuring .805” 1st fret, .970” 12th fret
-Fretboard: Maple, vintage-spec 7 ¼” radius
-Frets: Slender, no wear
-Scale Length: 34”
-Nut: 1 9/16”, bone
-Tuners: Clover buttons
-Serialization: “Made in Japan,” J-prefix
-Factory Markings: Model stamps on neck heel/pocket
Body Specs:
-Wood: Ash
-Pickups: PB-Vintage split-coil
-Controls: Volume, Tone
-Harness: Full-size Japanese pots date to May/October, 1990
-Hardware: Bridge with steel barrel saddles, flat-top knurled knobs
-Plastics: Three-ply white pickguard
The gloss Black finish has one chip adjacent to the neck pocket on the treble side, an area of shallow buckle scuffing on the upper bout of the back, and some minor nicks finish and scratches, largely limited to the lower bout perimeter. The ambered gloss on the neck profile is smooth and clean with just a couple shallow marks.
A gigbag is included.
$525.00
Original: $1,499.99
-65%1990 Fender Precision Bass ‘70 Vintage Reissue PB70-700 Black w/ Ash Body, Japan MIJ Fujigen—
$1,499.99
$525.00More Images
1990 Fender Precision Bass ‘70 Vintage Reissue PB70-700 Black w/ Ash Body, Japan MIJ Fujigen
Up for sale, a 1990 Fender Precision Bass ‘70 vintage reissue model PB70-700 in excellent, 100% original condition and in perfect working order. This “Made in Japan” P Bass was crafted exclusively for the Japanese domestic market during the golden age of Fender Japan production, uncommon outside its country of origin.
Weighing 9lbs 5oz, tonewoods include an ash body and a one-piece maple neck. The split-coil pickup delivers the warmth, sweet treble articulation and fundamental thump that defines the Precision tone, particularly round and rumbling with the Tone knob rolled back. This PB70-700 has been professionally setup here at Mike & Mike’s Guitar Bar with 45-100 roundwound strings, easy-playing action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Slender C, measuring .805” 1st fret, .970” 12th fret
-Fretboard: Maple, vintage-spec 7 ¼” radius
-Frets: Slender, no wear
-Scale Length: 34”
-Nut: 1 9/16”, bone
-Tuners: Clover buttons
-Serialization: “Made in Japan,” J-prefix
-Factory Markings: Model stamps on neck heel/pocket
Body Specs:
-Wood: Ash
-Pickups: PB-Vintage split-coil
-Controls: Volume, Tone
-Harness: Full-size Japanese pots date to May/October, 1990
-Hardware: Bridge with steel barrel saddles, flat-top knurled knobs
-Plastics: Three-ply white pickguard
The gloss Black finish has one chip adjacent to the neck pocket on the treble side, an area of shallow buckle scuffing on the upper bout of the back, and some minor nicks finish and scratches, largely limited to the lower bout perimeter. The ambered gloss on the neck profile is smooth and clean with just a couple shallow marks.
A gigbag is included.
Weighing 9lbs 5oz, tonewoods include an ash body and a one-piece maple neck. The split-coil pickup delivers the warmth, sweet treble articulation and fundamental thump that defines the Precision tone, particularly round and rumbling with the Tone knob rolled back. This PB70-700 has been professionally setup here at Mike & Mike’s Guitar Bar with 45-100 roundwound strings, easy-playing action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Slender C, measuring .805” 1st fret, .970” 12th fret
-Fretboard: Maple, vintage-spec 7 ¼” radius
-Frets: Slender, no wear
-Scale Length: 34”
-Nut: 1 9/16”, bone
-Tuners: Clover buttons
-Serialization: “Made in Japan,” J-prefix
-Factory Markings: Model stamps on neck heel/pocket
Body Specs:
-Wood: Ash
-Pickups: PB-Vintage split-coil
-Controls: Volume, Tone
-Harness: Full-size Japanese pots date to May/October, 1990
-Hardware: Bridge with steel barrel saddles, flat-top knurled knobs
-Plastics: Three-ply white pickguard
The gloss Black finish has one chip adjacent to the neck pocket on the treble side, an area of shallow buckle scuffing on the upper bout of the back, and some minor nicks finish and scratches, largely limited to the lower bout perimeter. The ambered gloss on the neck profile is smooth and clean with just a couple shallow marks.
A gigbag is included.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Up for sale, a 1990 Fender Precision Bass ‘70 vintage reissue model PB70-700 in excellent, 100% original condition and in perfect working order. This “Made in Japan” P Bass was crafted exclusively for the Japanese domestic market during the golden age of Fender Japan production, uncommon outside its country of origin.
Weighing 9lbs 5oz, tonewoods include an ash body and a one-piece maple neck. The split-coil pickup delivers the warmth, sweet treble articulation and fundamental thump that defines the Precision tone, particularly round and rumbling with the Tone knob rolled back. This PB70-700 has been professionally setup here at Mike & Mike’s Guitar Bar with 45-100 roundwound strings, easy-playing action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Slender C, measuring .805” 1st fret, .970” 12th fret
-Fretboard: Maple, vintage-spec 7 ¼” radius
-Frets: Slender, no wear
-Scale Length: 34”
-Nut: 1 9/16”, bone
-Tuners: Clover buttons
-Serialization: “Made in Japan,” J-prefix
-Factory Markings: Model stamps on neck heel/pocket
Body Specs:
-Wood: Ash
-Pickups: PB-Vintage split-coil
-Controls: Volume, Tone
-Harness: Full-size Japanese pots date to May/October, 1990
-Hardware: Bridge with steel barrel saddles, flat-top knurled knobs
-Plastics: Three-ply white pickguard
The gloss Black finish has one chip adjacent to the neck pocket on the treble side, an area of shallow buckle scuffing on the upper bout of the back, and some minor nicks finish and scratches, largely limited to the lower bout perimeter. The ambered gloss on the neck profile is smooth and clean with just a couple shallow marks.
A gigbag is included.
Weighing 9lbs 5oz, tonewoods include an ash body and a one-piece maple neck. The split-coil pickup delivers the warmth, sweet treble articulation and fundamental thump that defines the Precision tone, particularly round and rumbling with the Tone knob rolled back. This PB70-700 has been professionally setup here at Mike & Mike’s Guitar Bar with 45-100 roundwound strings, easy-playing action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Slender C, measuring .805” 1st fret, .970” 12th fret
-Fretboard: Maple, vintage-spec 7 ¼” radius
-Frets: Slender, no wear
-Scale Length: 34”
-Nut: 1 9/16”, bone
-Tuners: Clover buttons
-Serialization: “Made in Japan,” J-prefix
-Factory Markings: Model stamps on neck heel/pocket
Body Specs:
-Wood: Ash
-Pickups: PB-Vintage split-coil
-Controls: Volume, Tone
-Harness: Full-size Japanese pots date to May/October, 1990
-Hardware: Bridge with steel barrel saddles, flat-top knurled knobs
-Plastics: Three-ply white pickguard
The gloss Black finish has one chip adjacent to the neck pocket on the treble side, an area of shallow buckle scuffing on the upper bout of the back, and some minor nicks finish and scratches, largely limited to the lower bout perimeter. The ambered gloss on the neck profile is smooth and clean with just a couple shallow marks.
A gigbag is included.
