🎉 Up to 70% Off Selected ItemsShop Sale
1984 Fender Fullerton American Vintage ‘62 Stratocaster Black w/ Case, Hangtags
Up for sale, a 1984 Fender Fullerton-made American Vintage ‘62 Stratocaster in excellent condition and in perfect working order, complete with the original hardshell case, hangtags, and case candy. This Stratocaster was crafted during the brief window of American Vintage production at Fender’s original Fullerton, CA factory, 100% original save for a replacement five-way pickup selector switch and a refret with Narrow/Tall fretwire.
The Fullerton factory era of Fender vintage reissue production was very brief, lasting only from 1982-84, when Fender was still manufacturing their guitars on the same machines that made the originals back in the '50s and '60s. These models marked the birth of the American Vintage line of instruments, and were the very first vintage reissue guitars ever offered by the Fender company (when in this case the model they were replicating was only 20+ years old). While Fender would later move to a new factory in Corona, CA in 1985, the Fullerton-made guitars are highly prized for their rarity, tone, and connection to the origins of the Fender company.
Traditional tonewoods include an alder body, maple neck, and slab rosewood fingerboard, and this Strat weighs 7lbs 10oz. The single coils are wound to vintage spec with black bobbin flatwork, staggered alnico magnets and cloth-covered leads, delivering quintessential Strat chime and clarity, with a sweet sparkle at the bridge and a notably smooth treble response. There’s a woody chop on tap in the middle position and a bell-like top end and plenty of meat at the neck, with hollow quack at the “in-between” positions on the five-way pickup selector switch. This Fullerton-made American Vintage ‘62 Stratocaster has been professionally setup here at Mike & Mike’s Guitar Bar with 10-46 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Slender C, measuring .780” 1st fret, .845” 12th fret
-Fretboard: Rosewood slab, vintage-spec 7 1/4” radius
-Frets: 6105(Narrow/Tall), refret, no wear
-Scale Length: 25 1/2”
-Nut: 1.650”, bone
-Tuners: Kluson-style
-Serialization: V00-prefix (neck plate)
-Factory Markings: Neck heel pencil dated 10-30-84
Body Specs:
-Wood: Alder
-Pickups: Black bobbin single coil x3
-Harness: CTS pots date to the 43nd week of ‘82, Sprague Orange Drop tone cap
-Controls: Volume, Tone x2, Five-way pickup selector (replacement, original three-way included)
-Hardware: Synchronized Tremolo, jack cup
-Plastics: Three-ply white pickguard, gently aged knobs
The gloss Black nitro lacquer finish shows only a small area of shallow buckle rash central to the back and various small dings and finish scratches consistent with decades of careful use. The ambered nitro gloss on the neck profile is smooth and clean.
The original tweed hardshell case is included, along with the hangtag, 1982 catalog, case candy, and original pickup selector switch.
The Fullerton factory era of Fender vintage reissue production was very brief, lasting only from 1982-84, when Fender was still manufacturing their guitars on the same machines that made the originals back in the '50s and '60s. These models marked the birth of the American Vintage line of instruments, and were the very first vintage reissue guitars ever offered by the Fender company (when in this case the model they were replicating was only 20+ years old). While Fender would later move to a new factory in Corona, CA in 1985, the Fullerton-made guitars are highly prized for their rarity, tone, and connection to the origins of the Fender company.
Traditional tonewoods include an alder body, maple neck, and slab rosewood fingerboard, and this Strat weighs 7lbs 10oz. The single coils are wound to vintage spec with black bobbin flatwork, staggered alnico magnets and cloth-covered leads, delivering quintessential Strat chime and clarity, with a sweet sparkle at the bridge and a notably smooth treble response. There’s a woody chop on tap in the middle position and a bell-like top end and plenty of meat at the neck, with hollow quack at the “in-between” positions on the five-way pickup selector switch. This Fullerton-made American Vintage ‘62 Stratocaster has been professionally setup here at Mike & Mike’s Guitar Bar with 10-46 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Slender C, measuring .780” 1st fret, .845” 12th fret
-Fretboard: Rosewood slab, vintage-spec 7 1/4” radius
-Frets: 6105(Narrow/Tall), refret, no wear
-Scale Length: 25 1/2”
-Nut: 1.650”, bone
-Tuners: Kluson-style
-Serialization: V00-prefix (neck plate)
-Factory Markings: Neck heel pencil dated 10-30-84
Body Specs:
-Wood: Alder
-Pickups: Black bobbin single coil x3
-Harness: CTS pots date to the 43nd week of ‘82, Sprague Orange Drop tone cap
-Controls: Volume, Tone x2, Five-way pickup selector (replacement, original three-way included)
-Hardware: Synchronized Tremolo, jack cup
-Plastics: Three-ply white pickguard, gently aged knobs
The gloss Black nitro lacquer finish shows only a small area of shallow buckle rash central to the back and various small dings and finish scratches consistent with decades of careful use. The ambered nitro gloss on the neck profile is smooth and clean.
The original tweed hardshell case is included, along with the hangtag, 1982 catalog, case candy, and original pickup selector switch.
$5,499.99
1984 Fender Fullerton American Vintage ‘62 Stratocaster Black w/ Case, Hangtags—
$5,499.99
More Images
1984 Fender Fullerton American Vintage ‘62 Stratocaster Black w/ Case, Hangtags
Up for sale, a 1984 Fender Fullerton-made American Vintage ‘62 Stratocaster in excellent condition and in perfect working order, complete with the original hardshell case, hangtags, and case candy. This Stratocaster was crafted during the brief window of American Vintage production at Fender’s original Fullerton, CA factory, 100% original save for a replacement five-way pickup selector switch and a refret with Narrow/Tall fretwire.
The Fullerton factory era of Fender vintage reissue production was very brief, lasting only from 1982-84, when Fender was still manufacturing their guitars on the same machines that made the originals back in the '50s and '60s. These models marked the birth of the American Vintage line of instruments, and were the very first vintage reissue guitars ever offered by the Fender company (when in this case the model they were replicating was only 20+ years old). While Fender would later move to a new factory in Corona, CA in 1985, the Fullerton-made guitars are highly prized for their rarity, tone, and connection to the origins of the Fender company.
Traditional tonewoods include an alder body, maple neck, and slab rosewood fingerboard, and this Strat weighs 7lbs 10oz. The single coils are wound to vintage spec with black bobbin flatwork, staggered alnico magnets and cloth-covered leads, delivering quintessential Strat chime and clarity, with a sweet sparkle at the bridge and a notably smooth treble response. There’s a woody chop on tap in the middle position and a bell-like top end and plenty of meat at the neck, with hollow quack at the “in-between” positions on the five-way pickup selector switch. This Fullerton-made American Vintage ‘62 Stratocaster has been professionally setup here at Mike & Mike’s Guitar Bar with 10-46 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Slender C, measuring .780” 1st fret, .845” 12th fret
-Fretboard: Rosewood slab, vintage-spec 7 1/4” radius
-Frets: 6105(Narrow/Tall), refret, no wear
-Scale Length: 25 1/2”
-Nut: 1.650”, bone
-Tuners: Kluson-style
-Serialization: V00-prefix (neck plate)
-Factory Markings: Neck heel pencil dated 10-30-84
Body Specs:
-Wood: Alder
-Pickups: Black bobbin single coil x3
-Harness: CTS pots date to the 43nd week of ‘82, Sprague Orange Drop tone cap
-Controls: Volume, Tone x2, Five-way pickup selector (replacement, original three-way included)
-Hardware: Synchronized Tremolo, jack cup
-Plastics: Three-ply white pickguard, gently aged knobs
The gloss Black nitro lacquer finish shows only a small area of shallow buckle rash central to the back and various small dings and finish scratches consistent with decades of careful use. The ambered nitro gloss on the neck profile is smooth and clean.
The original tweed hardshell case is included, along with the hangtag, 1982 catalog, case candy, and original pickup selector switch.
The Fullerton factory era of Fender vintage reissue production was very brief, lasting only from 1982-84, when Fender was still manufacturing their guitars on the same machines that made the originals back in the '50s and '60s. These models marked the birth of the American Vintage line of instruments, and were the very first vintage reissue guitars ever offered by the Fender company (when in this case the model they were replicating was only 20+ years old). While Fender would later move to a new factory in Corona, CA in 1985, the Fullerton-made guitars are highly prized for their rarity, tone, and connection to the origins of the Fender company.
Traditional tonewoods include an alder body, maple neck, and slab rosewood fingerboard, and this Strat weighs 7lbs 10oz. The single coils are wound to vintage spec with black bobbin flatwork, staggered alnico magnets and cloth-covered leads, delivering quintessential Strat chime and clarity, with a sweet sparkle at the bridge and a notably smooth treble response. There’s a woody chop on tap in the middle position and a bell-like top end and plenty of meat at the neck, with hollow quack at the “in-between” positions on the five-way pickup selector switch. This Fullerton-made American Vintage ‘62 Stratocaster has been professionally setup here at Mike & Mike’s Guitar Bar with 10-46 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Slender C, measuring .780” 1st fret, .845” 12th fret
-Fretboard: Rosewood slab, vintage-spec 7 1/4” radius
-Frets: 6105(Narrow/Tall), refret, no wear
-Scale Length: 25 1/2”
-Nut: 1.650”, bone
-Tuners: Kluson-style
-Serialization: V00-prefix (neck plate)
-Factory Markings: Neck heel pencil dated 10-30-84
Body Specs:
-Wood: Alder
-Pickups: Black bobbin single coil x3
-Harness: CTS pots date to the 43nd week of ‘82, Sprague Orange Drop tone cap
-Controls: Volume, Tone x2, Five-way pickup selector (replacement, original three-way included)
-Hardware: Synchronized Tremolo, jack cup
-Plastics: Three-ply white pickguard, gently aged knobs
The gloss Black nitro lacquer finish shows only a small area of shallow buckle rash central to the back and various small dings and finish scratches consistent with decades of careful use. The ambered nitro gloss on the neck profile is smooth and clean.
The original tweed hardshell case is included, along with the hangtag, 1982 catalog, case candy, and original pickup selector switch.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Up for sale, a 1984 Fender Fullerton-made American Vintage ‘62 Stratocaster in excellent condition and in perfect working order, complete with the original hardshell case, hangtags, and case candy. This Stratocaster was crafted during the brief window of American Vintage production at Fender’s original Fullerton, CA factory, 100% original save for a replacement five-way pickup selector switch and a refret with Narrow/Tall fretwire.
The Fullerton factory era of Fender vintage reissue production was very brief, lasting only from 1982-84, when Fender was still manufacturing their guitars on the same machines that made the originals back in the '50s and '60s. These models marked the birth of the American Vintage line of instruments, and were the very first vintage reissue guitars ever offered by the Fender company (when in this case the model they were replicating was only 20+ years old). While Fender would later move to a new factory in Corona, CA in 1985, the Fullerton-made guitars are highly prized for their rarity, tone, and connection to the origins of the Fender company.
Traditional tonewoods include an alder body, maple neck, and slab rosewood fingerboard, and this Strat weighs 7lbs 10oz. The single coils are wound to vintage spec with black bobbin flatwork, staggered alnico magnets and cloth-covered leads, delivering quintessential Strat chime and clarity, with a sweet sparkle at the bridge and a notably smooth treble response. There’s a woody chop on tap in the middle position and a bell-like top end and plenty of meat at the neck, with hollow quack at the “in-between” positions on the five-way pickup selector switch. This Fullerton-made American Vintage ‘62 Stratocaster has been professionally setup here at Mike & Mike’s Guitar Bar with 10-46 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Slender C, measuring .780” 1st fret, .845” 12th fret
-Fretboard: Rosewood slab, vintage-spec 7 1/4” radius
-Frets: 6105(Narrow/Tall), refret, no wear
-Scale Length: 25 1/2”
-Nut: 1.650”, bone
-Tuners: Kluson-style
-Serialization: V00-prefix (neck plate)
-Factory Markings: Neck heel pencil dated 10-30-84
Body Specs:
-Wood: Alder
-Pickups: Black bobbin single coil x3
-Harness: CTS pots date to the 43nd week of ‘82, Sprague Orange Drop tone cap
-Controls: Volume, Tone x2, Five-way pickup selector (replacement, original three-way included)
-Hardware: Synchronized Tremolo, jack cup
-Plastics: Three-ply white pickguard, gently aged knobs
The gloss Black nitro lacquer finish shows only a small area of shallow buckle rash central to the back and various small dings and finish scratches consistent with decades of careful use. The ambered nitro gloss on the neck profile is smooth and clean.
The original tweed hardshell case is included, along with the hangtag, 1982 catalog, case candy, and original pickup selector switch.
The Fullerton factory era of Fender vintage reissue production was very brief, lasting only from 1982-84, when Fender was still manufacturing their guitars on the same machines that made the originals back in the '50s and '60s. These models marked the birth of the American Vintage line of instruments, and were the very first vintage reissue guitars ever offered by the Fender company (when in this case the model they were replicating was only 20+ years old). While Fender would later move to a new factory in Corona, CA in 1985, the Fullerton-made guitars are highly prized for their rarity, tone, and connection to the origins of the Fender company.
Traditional tonewoods include an alder body, maple neck, and slab rosewood fingerboard, and this Strat weighs 7lbs 10oz. The single coils are wound to vintage spec with black bobbin flatwork, staggered alnico magnets and cloth-covered leads, delivering quintessential Strat chime and clarity, with a sweet sparkle at the bridge and a notably smooth treble response. There’s a woody chop on tap in the middle position and a bell-like top end and plenty of meat at the neck, with hollow quack at the “in-between” positions on the five-way pickup selector switch. This Fullerton-made American Vintage ‘62 Stratocaster has been professionally setup here at Mike & Mike’s Guitar Bar with 10-46 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Slender C, measuring .780” 1st fret, .845” 12th fret
-Fretboard: Rosewood slab, vintage-spec 7 1/4” radius
-Frets: 6105(Narrow/Tall), refret, no wear
-Scale Length: 25 1/2”
-Nut: 1.650”, bone
-Tuners: Kluson-style
-Serialization: V00-prefix (neck plate)
-Factory Markings: Neck heel pencil dated 10-30-84
Body Specs:
-Wood: Alder
-Pickups: Black bobbin single coil x3
-Harness: CTS pots date to the 43nd week of ‘82, Sprague Orange Drop tone cap
-Controls: Volume, Tone x2, Five-way pickup selector (replacement, original three-way included)
-Hardware: Synchronized Tremolo, jack cup
-Plastics: Three-ply white pickguard, gently aged knobs
The gloss Black nitro lacquer finish shows only a small area of shallow buckle rash central to the back and various small dings and finish scratches consistent with decades of careful use. The ambered nitro gloss on the neck profile is smooth and clean.
The original tweed hardshell case is included, along with the hangtag, 1982 catalog, case candy, and original pickup selector switch.
